Reset BTS Smoke Alarm(RST BTSSMOKEALM)

Function

An OM command that clears the smoke alarm for a power monitoring module.

Note

1. Running this command can only clear the smoke alarms displayed on the MML client. Before clearing the smoke alarm, go to the site for handling.

2. This command applies to the BTS3012AE, BTS3006C, BTS3002E, BTS3012, BTS3012II, BTS3036, BTS3036A, DBS3036, BTS3900 GSM, BTS3900A GSM, and DBS3900 GSM.

3. The BTS must be configured with the board of the PMU type.

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by name or by index. Default value: None
BTSIDX	BTS Index	Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of the target BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None
BTSNAME	BTS Name	Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None
SRN	Subrack No.	Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the BTS board is located. The subrack number is unique in a BTS. Default value: None
SN	Slot No.	Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot that holds the BTS board where the smoke alarm is generated. Default value: None

Example

Clear the smoke alarm for a power monitoring module (Index Type = BYIDX(By Index); BTS Index = 0; Subrack No. = 0; Slot No. = 4):
RST BTSSMOKEALM:IDXTYPE=BYIDX,BTSIDX=0,SRN=0,SN=4;