1. The MML client must run properly.
2. The BSC must communicate properly with the BTS.
3. The BTS must be configured with the RXU and connected with the RET antenna.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None |
| BTSIDX | BTS Index | Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None |
| BTSNAME | BTS Name | Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None |
| SRN | Subrack No. | Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the board that controls the RET antenna is located. The subrack number is unique in a BTS. Default value: None |
| SN | Slot No. | Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot that holds the board that controls the RET antenna. Default value: None |
| ANTNO | Antenna No | Meaning: antenna number Value range: 0-35 Explanation: This parameter specifies the number of a RET antenna. Default value: None |