1. The MML client must run properly.
2. The BSC must communicate properly with the BTS.
3. The BTS must be configured with the board that controls the RET antenna and connected with the RET antenna.
4. The running of this command calibrates the starting point of the RET antenna motor. Run this command when the RET antenna is started for the first time or when the alarm related to the RET antenna is reported.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None |
| BTSIDX | BTS Index | Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None |
| BTSNAME | BTS Name | Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None |
| SRN | Subrack No. | Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the board that controls the RET antenna is located. The subrack number is unique in a BTS. Default value: None |
| SN | Slot No. | Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot that holds the board that controls the RET antenna. Default value: None |
| ANTNO | Antenna No | Meaning: antenna number Value range: 0-35 Explanation: This parameter specifies the number of a RET antenna. Default value: None |
Reset the tilt angle of RET antenna (Index Type = BYIDX(By Index); BTS Index = 0; Subrack No. = 0; Slot No. = 3; Antenna No = 0): RST RETANTTILT: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=3, ANTNO=0; The result is as follows: +++ HUAWEI 2008-02-20 17:02:16 O&M #11 %%RST RETANTTILT: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=3, ANTNO=0;%% RETCODE = 0 Execution succeeded Subsequent reports to be output --- END +++ HUAWEI 2008-02-20 17:02:22 O&M #11 %%RST RETANTTILT: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=3, ANTNO=0;%% RETCODE = 0 Execution succeeded Restore the RET antenna tilt angle ---------------- Progress = 16% (Number of results = 1) Subsequent reports to be output --- END ...... +++ HUAWEI 2008-02-21 18:02:00 O&M #3791 %%RST RETANTTILT: IDXTYPE=BYIDX, BTSIDX=0, SRN=0, SN=3, ANTNO=0;%% RETCODE = 0 Execution succeeded Restore the RET antenna tilt angle ---------------- Progress = 100% (Number of results = 1) 13 reports in total --- END