1. The BSC must communicate properly with the BTS.
2. The BTS must be configured with a clock board.
3. This command should be ran after the running of the SET BTSCLKPARA command to make the setting take effect.
| ID | Name | Description |
|---|---|---|
| SITEIDXTYPE | Site Index Type | Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None |
| SITEIDX | Site Index | Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None |
| SITENAME | Site Name | Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None |