Set Forced Tuning of Cavity Frequency(SET BTSFRCINCH)

Function

An CFG command used to force fine tuning of cavity frequency.

Note

1. The MML client communicates properly with the BSC.

2. The BSC communicates properly with the BTS.

3. The BTS is configured with the DFCU.

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None
BTSIDX	BTS Index	Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None
BTSNAME	BTS Name	Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None
SRN	Subrack No.	Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack where a BTS board is located. The subrack number is unique in a site. Default value: None
SN	Slot No.	Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot in which a BTS board is located. Default value: None

Example

1. Set forced tuning of cavity frequency for a DFCU (Index Type = BYIDX(By Index); BTS Index = 0; Subrack No. = 0; Slot No. = 4):
SET BTSFRCINCH:IDXTYPE=BYIDX,BTSIDX=0,SRN=0,SN=4;