An OM command that enables the board that controls the RET antenna to control the RET antenna.
1. The MML client must run properly.
2. The BSC must communicate properly with the BTS.
3. The BTS must be configured with the board that controls the RET antenna and connected with the RET antenna.
4. After the setting of the tilt angle is complete, the RET antenna from certain manufacturers does not allow the adjustment of the tile angle without the running of the command. The running of this command enables the adjustment of the RET antenna tilt angle.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None |
| BTSIDX | BTS Index | Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None |
| BTSNAME | BTS Name | Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None |
| SRN | Subrack No. | Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the board that controls the RET antenna is located. The subrack number is unique in a BTS. Default value: None |
| SN | Slot No. | Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot that holds the board that controls the RET antenna. Default value: None |
| ANTNO | Antenna No | Meaning: antenna number Value range: 0-35 Explanation: This parameter specifies the number of a RET antenna. Default value: None |