Set SGSN Pool Status(SET SGSNPOOL)

Function

A configuration command that set the status of the SGSN pool.

Note

When the SGSN Pool feature is enabled, 32 PTPBVCs can be configured in a cell; when the SGSN Pool feature is disabled, only one PTPBVC can be configured in a cell.

Parameters

ID	Name	Description
CNOPNAME	Service Provider Name	Meaning:Service Provider Name Value range:1-32 characters Explanation: This parameter uniquely identifies an Service Provider entity in the system. Default value:None
POOLALLOW	Allow SGSN Pool	Meaning:Allow SGSN Pool Value range:DENY(deny),ALLOW(allow) Explanation: This parameter specifies whether to enable the SGSN Pool function. Yes: Multiple SGSNs serve one cell. No: One SGSN serves one cell. Default value:None
NRILEN	NRI length	Meaning:NRI length Value range:1~10 Explanation: If the SGSN pool function is enabled, the NRI length cannot be 0. Default value:None
NULLNRI	NullNRI Value	Meaning:NullNRI Value Value range:0~1023 Explanation: NullNRI Value. Default value:None

Example

Set the SGSN pool status ( Operator Name = 46000; SGSN Pool Allow = ALLOW(allow); SGSN NRI Length = 8; NullNRI Value = 11):
SET SGSNPOOL: CnOpName="46000", POOLALLOW=ALLOW, NRILEN=8, NULLNRI=11;