1.Only one configuration record is allowed. Therefore, every time you configure a new transfer server, the previous configuration is overwritten.
2.If the transfer server is configured on the OMU, you must use the STR FTPSSRV command to start the FTP server on the OMU. Otherwise, the LMT may fail to be connected to the OMU.
3.If the IP Address is configured 0.0.0.0,the transfer server is disabled.
| ID | Name | Description |
|---|---|---|
| ISATOMU | OMU Transfer Server | Meaning:OMU Transfer Server Value range:NO(NO),YES(YES) Explanation: If the transfer server is configured on the OMU, you need not specify "IP Address", "Port No.", "User Name", and "User Password". Default value:None |
| IP | IP Address | Meaning:IP Address Value range:0.0.0.0-255.255.255.255 Explanation: This parameter specifies the IP address of the transfer server. If the IP Address is configured 0.0.0.0,the transfer server is disabled. Default value:None |
| USERNAME | User Name | Meaning:User Name Value range:1-32 characters Explanation: This parameter specifies the user name for logging in to the FTP server. Excluding the invalid characters ';',',','"','''','=','\','%%','+++','&','#'. Default value:None |
| PWD | User password | Meaning:User password Value range:Password type parameter Explanation: This parameter specifies the user password for logging in to the FTP server. The password cannot contain the following characters: comma (,), semicolon (;), equal mark (=), double quotation marks ("), single quotation marks ('), and backward slash (\). Default value:None |
| TRANALIAS | Transfer Alias | Meaning:alias of the transfer server Value range: 1-32 characters Explanation:This parameter specifies the alias of the transfer server.Excluding the invalid characters ';',',','"','''','=','\','%%','+++','&','#'. Default value: None |
| PORTNO | Port No. | Meaning:Port No. Value range:0~65534 Explanation: This parameter specifies the port number of the FTP server. Default value:None |