Stop Test Battery of BTS(STP BTSBATTTST)

Function

An OM command that stops the BTS battery test.

Note

1. The BSC must communicate properly with the BTS.

2. The BTS must be configured with the battery.

Parameters

ID	Name	Description
IDXTYPE	Index Type	Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None
STIDX	Site Index	Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None
STNAME	Site Name	Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None
SRN	Subrack No.	Meaning: subrack number Value range: 0-53 Explanation: This parameter specifies the number of the subrack in which the BTS power module is located. The subrack number is unique in a BTS. Default value: None
SN	Slot No.	Meaning: slot number Value range: 0-23 Explanation: This parameter specifies the number of the slot in which the BTS power module is located. Default value: None

Example

Stop the test on the battery (Index Type = BYIDX(By Index); Site Index = 0; Subrack No. = 0; Slot No. = 15):
STP BTSBATTTST: IDXTYPE=BYIDX, STIDX=0, SRN=0, SN=15;