An OM command that stops the TRX loopback test, channel loopback test, and speech codec test.
1. The BSC must communicate properly with the BTS.
2. The target BTS must be configured, and the TRX must be in active state.
| ID | Name | Description |
|---|---|---|
| IDXTYPE | Index Type | Meaning: how to specify a BTS Value range: BYNAME(By Name), BYIDX(By Index) Explanation: This parameter determines whether to specify a BTS by its name or index. Default value: None |
| BTSIDX | BTS Index | Meaning: BTS index Value range: 0-2047 Explanation: 1. This parameter specifies the number of a BTS. Each BTS is numbered uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYIDX(By Index). Default value: None |
| BTSNAME | BTS Name | Meaning: BTS name Value range: 1-32 characters Explanation: 1. This parameter specifies the name of the target BTS. Each BTS is named uniquely in a BSC. 2. This parameter is mandatory if Index Type is set to BYNAME(By Name). Default value: None |
| TRXNO | TRX No. | Meaning: TRX number Value range: 0-71 Explanation: This parameter specifies the TRX number in the BTS. Default value: None |