Parameter Name |
TX J0 Byte |
|---|---|
Description |
J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port interconnection parameters transmitted to the peer end continuously. The TX J0 byte must be the same as the Expect RX J0 Byte. This parameter enables the peer end to check whether it is connected to the local end continuously. |
GUI Value Range |
[1 Byte,16 Bytes,64 Bytes] |
Default Value |
16 Bytes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
16 Bytes |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is available for the optical interface board only. |