Parameter Name |
Expect RX J0 Byte |
|---|---|
Description |
This parameter specifies the J0 byte that is expected to be received. J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port interconnection parameters. The BSC receives the peer J0 byte continuously. |
GUI Value Range |
[1 Byte,16 Bytes,64 Bytes] |
Default Value |
16 Bytes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
When the Expect RX J0 Byte is equal to the Received J0 Byte, it indicates that the TX and RX ends are connected continuously. If the TX and RX ends are not connected continuously, the Mismatch of Trace Byte of the Regenerator Section on the Optical Port (RTIM) alarm is reported. |
Recommended Value |
16 Bytes |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is available for the sub-board of the optical interface board only. |