Parameter Name |
High Order Path 1 Expect RX J1 Byte |
|---|---|
Description |
This parameter specifies the J1 byte that is expected to be received. J1 byte, also called the trace byte of the high-order path on the optical port, is one of the optical port interconnection parameters. The local end receives the J1 byte continuously from the peer end. When the Expect RX J1 Byte is equal to the Received J1 Byte, it indicates that the TX and RX ends are connected continuously. If the TX and RX ends are not connected continuously, the Trace Flag Mismatch on the High-Order Path of the Optical Port (HPTIM) alarm is reported. |
GUI Value Range |
[1 Byte,16 Bytes,64 Bytes] |
Default Value |
16 Bytes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The settings of this parameter should be consistent with TX J1 Byte for the optical equipment on the peer end. |
Recommended Value |
16 Bytes |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is available for the sub-board of the optical interface board only. |