Parameter Name |
TX S1 Byte |
|---|---|
Description |
This parameter specifies the transmitted S1 byte. It is a synchronization status byte used by the local BSC to examine the quality of the received clock signal before the BSC switches to a clock source with higher quality. The less the value of S1 is, the lower the clock quality is. |
GUI Value Range |
[0,15] |
Default Value |
0 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The settings must be the same on the two sides of the interconnected optical ports. |
Recommended Value |
0 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is available for the sub-board of the optical interface board only. |