Parameter Name |
Expect RX C2 Byte |
|---|---|
Description |
This parameter specifies the C2 byte that is expected to be received. C2 byte is the signal label byte of the high-order path on the optical port. It is used to indicate the multiplexing structure and the information payload of the VC frame. During optical interconnection, the settings of this parameter should be consistent with the C2 byte that is transmitted by the peer end. |
GUI Value Range |
[0,255] |
Default Value |
2 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If the actually received C2 byte is inconsistent with the value of this parameter, it indicates that services are not loaded on the high-order path. At the same time, the Service Unequipped on the High-Order Path of the Optical Port (HPUNEQ) alarm or High-Order Path Signal Label Byte Mismatch (HPSLM) alarm is reported. |
Recommended Value |
2 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter is available for the sub-board of the optical interface board only. |