Parameter Name |
J1 Byte Alarm Report Switch |
|---|---|
Description |
This parameter specifies whether to report the Trace Flag Mismatch on the High-Order Path of the Optical Port (HPTIM) alarm. During optical port interconnection, if inconsistency occurs on TX J1 Byte or Expect RX J1 Byte on the two sides, the Trace Flag Mismatch on the High-Order Path of the Optical Port (HPTIM) alarm is reported. |
GUI Value Range |
[Close,Open] |
Default Value |
Close |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
In some special cases, during the interconnection with optical equipment from other vendors, the communication between the equipment on the two sides is normal though TX J1 Byte and Expect RX J1 Byte on the two sides do not match. In this case, this parameter can be set to No, not to report the Trace Flag Mismatch on the High-Order Path of the Optical Port (HPTIM) alarm. |
Recommended Value |
Close |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |