Parameter Name |
TX J2 Byte |
|---|---|
Description |
This parameter specifies the transmitted J2 byte. J2 is used to transmit the lower-order path accessing point identifier, which is negotiated by the TX and RX ends. The receive end uses this identifier to ensure that the TX and RX end are connected continuously. |
GUI Value Range |
[1 Byte,16 Bytes] |
Default Value |
16 Bytes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
TX J2 Byte should be consistent with Expect RX J2 Byte on the peer end, otherwise, the communication between the local and peer ends is affected. |
Recommended Value |
16 Bytes |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |