Parameter Name |
TC CRC Switch |
---|---|
Description |
This parameter specifies the cyclic redundancy check (CRC) switch, which can be set to Open or Close. The value of this parameter determines whether check is performed on the TRAU frame between the BSC and the BTS. |
GUI Value Range |
[OFF,ON] |
Default Value |
ON |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
According to the GSM protocols, the BSC performs CRC on each TRAU frame. If the CRC of a certain TRAU frame fails, the TRAU frame is regarded as an invalid one. Then, the BSC performs smoothing on the invalid frame, thus eliminating the noise caused by the errors in parameter transmission. The CRC should be performed on the TRAU frames of all speech services except the FR service. If this parameter is set to Open, services are not affected. |
Recommended Value |
ON |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |