Parameter Name |
Support Auto Check of BTS Connection Port |
|---|---|
Description |
This parameter specifies whether the BSC checks the incorrect connection abnormality of the E1 cables connected to the BTS on the port of the GEIUB. After the BTS is initiated, if the E1 cables connected to the BTS are incorrectly changed to the ports configured on other BTSs of the GEIUB, the BTS are not reset automatically. Thus, the data configured on the BTS side and that configured on the BSC side are inconsistent. |
GUI Value Range |
[No,Yes] |
Default Value |
Yes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to Yes, the BSC is permitted to check the abnormality automatically. |
Recommended Value |
Yes |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |