Parameter Name |
Disconnect Handover Protect Timer(s) |
|---|---|
Description |
After receiving a DISCONNECT message from the MS, the BSC does not allow the MS to perform handover during the period set by this parameter. Therefore, the following case can be avoided: After being handed over to the target cell, the MS cannot be put on hook because it does not receive a release acknowledgement message. |
GUI Value Range |
[0,15] |
Default Value |
3 |
Unit |
Seconds |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If this parameter is set to 15, you can infer that the protection function is not enabled. |
Recommended Value |
3 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |