Parameter Name |
Flex Abis History Connection Status |
|---|---|
Description |
This parameter specifies whether to turn on the switch of Flex Abis History Connection Status when a call is newly accessed. If this parameter is set to Yes, after a call is released, its transmission link can be retained if the whole link or part of the link can be used by the newly accessed call. Then, the BSC allocates the available link or part of the available link to the newly accessed call. In this way, the transmission link can be set up quickly. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
When this parameter is set to Yes, the new call preferentially uses the Flex Abis history links, thus increasing the access rate of Flex Abis history links and shortening the call access time; when this parameter is set to No, during the Flex Abis link connection of a new call, the BSC sends the BscSetTsLink message to the BTS again to reconnect the link between the BSC and the BTS. |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |