Parameter Name |
Jitter Buffer Switch |
|---|---|
Description |
This parameter specifies whether to enable the function of LAPD jitter buffer on the BSC side. |
GUI Value Range |
[OFF,ON] |
Default Value |
OFF |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
If many packets on the IP network are out of order, this switch should be turned on. If no packets or only a few packets are out of order, this switch should be turned off. Otherwise, additional transmission delay may occur. |
Recommended Value |
OFF |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |