Parameter Name |
JitterBufferAllow |
|---|---|
Description |
This parameter specifies whether to enable the LAPDJitterBuffer algorithm.This algorithm adds the buffer adaptation layer to the LAPD layer at the RX end. The function of this parameter is delay receiving the frame I that is transmitted later but arrives earlier. To avoid the inappropriate sequence when receiving the frames, all early-arrived frames I are arranged in sequence and then sent to the LAPD layer one by one. |
GUI Value Range |
[Disabled,Enabled] |
Default Value |
Disable |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
Disable |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter cannot be configured in BTSs other than the IP BTS. |