Parameter Name |
Support Separate Mode |
|---|---|
Description |
This parameter specifies whether to support the separate mode. The separate mode indicates that the the physical TRX board and the logical carrier are separated in configuration. That is, there is no logical carrier mapping the physical TRX board.The inverse of the separate mode is non-separate mode. The non-separate mode indicates that each physical TRX board maps one logical carrier. That is, as long as the physical TRX board is available, the logical carrier is available, and the same is true inversely. |
GUI Value Range |
[0,1] |
Default Value |
0 |
Unit |
None |
Step |
- |
Modification Rules |
Modifying this parameter leads to BTS reset. |
Configuration Policy |
If you need to add a QTRU in non-separate mode, change the non-separate mode to separate mode first. Note that the separate mode cannot be changed to non-separate mode. |
Recommended Value |
0 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |