Parameter Name |
BTS Version 2 |
|---|---|
Description |
This parameter specifies the software version 2 that is automatically loaded and activated. The BTS software stored on the GBAM must be consistent with this version number. Otherwise, the software version inconsistency alarm may be reported. The BTSs may work in hybrid combined cabinets and cabinet groups mode, therefore, two software versions with different version numbers are designed. This parameter can be configured only when the parameter BTS Version 1 has been configured. An example of the version format is as follows: BTS3000V100R008C11SPC003. This parameter can be set to only a BTS software version or a cold patch version. You can use either of the following methods to query the version number of the BTS software or the cold patch. Method 1: If the BTS software or the cold patch is downloaded to the OMU through the MML command DLD BTSSW, you can run the MML command LST BTSSWBYVER to obtain the number of the version to be loaded according to the returned result. Method 2: If the BTS software version or the cold patch is not downloaded to the OMU, you can decompress the BTS software package or cold patch package. Then, check the vercfg.xml file in the level-1 directory of the compressed package. The value after the label "SoftwareVersion" is the software version. |
GUI Value Range |
[0~51 characters] |
Default Value |
None |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
1.This parameter can be configured only when the parameter BTS Version 1 has been configured. 2.This parameter can be set to only a software version or a cold patch version. The version number containing "SPH" indicates the hot patch version. Thus, you cannot enter such a version number. |