Parameter Name |
BTS Patch Version |
|---|---|
Description |
This parameter specifies the patch version loaded to the BTS. This parameter can be configured only when the parameter Auto Download Active Function Switch is set to Yes. This parameter can be set to only a hot patch version. You can use either of the following methods to query the version number of the BTS hot patch. Method 1: If the BTS hot patch is downloaded to the OMU through the MML command DLD BTSPATCH, you can run the MML command LST BTSPATCH to obtain the number of the hot patch package and the hot patch version according to the returned result. Method 2: If the BTS hot patch is not downloaded to the OMU, you can decompress the BTS hot patch package. Then, check the patchcfg.xml file in the level-1 directory of the compressed package. The value after the label "PatchVersion" is the software version. |
GUI Value Range |
[0~51 characters] |
Default Value |
None |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
1.This parameter can be configured only when the parameter Auto Download Active Function Switch is set to Yes. 2.This parameter can be set to only a hot patch version. This parameter can be set to only the hot patch version. The version containing the "SPH" indicates the BTS hot patch version. Therefore, you cannot enter the version not containing the "SPH". |