Parameter Name |
Start CIC |
|---|---|
Description |
A circuit identity code (CIC) uniquely identifies a timeslot that carries traffic (voice). The Start CIC identifies E1 timeslot 0. If the Start CIC increases by one, E1 timeslot 1 is indicated. If the Start CIC increases by two, E1 timeslot 2 is indicated. This parameter can be configured and modified by users. The 32 E1 timeslots on the A interface have three states: occupied, CIC, and idle. E1 timeslot 0 is used for synchronization and is in occupied state. |
GUI Value Range |
[0,65535] |
Default Value |
None |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Specifying the Start CIC fails if either of the following conditions is met. 1. The Start CIC is the same as one existing CIC. 2. The Start CIC is different from any existing CIC; however, the CICs configured for the other 31 E1 timeslots of the A interface board according to the Start CIC are the same as the existing CICs. |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Transmission |
Caution |
None |