Parameter Name |
Start PCIC |
|---|---|
Description |
A packet circuit identity code (PCIC) uniquely identifies a timeslot that carries traffic (a timeslot used for PS services). The transmission rate of each E1 timeslot on the Pb interface is 16 kbit/s. Thus, an E1 link on the Pb interface can be divided into 128 timeslots. The Start PCIC corresponds to E1 timeslot 0. If the Start PCIC increases by one, E1 timeslot 1 is indicated. If the Start PCIC increases by two, E1 timeslot 2 is indicated. This parameter can be configured and modified by users. The 128 E1 timeslots on the Pb interface have three states: occupied, PCIC, and idle. If a timeslot is in idle state, the timeslot cannot be used. Logically, the idle state is the same as the occupied state. |
GUI Value Range |
[0,65535] |
Default Value |
None |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The newly-configured PCIC for E1 timeslots on the Pb interface must be different from the existing PCICs. The Start PCIC must be a multiple of 128. |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Transmission |
Caution |
None |