Parameter Name |
Uplink Tributary 0 Power Attenuation Factor |
|---|---|
Description |
This parameter specifies the power attenuation factor for UL tributary 0. It is used to adjust the gain of the antenna board based on parameters tower amplifier tag and power attenuation factor.If the gain of the tower mounted amplifier is G dB, the power attenuation factor of the antenna board should be configured as G minus four.When no tower-mounted amplifier is available, the power attenuation factor should be set to 0. |
GUI Value Range |
[0,15] |
Default Value |
0 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Equipment |
Caution |
None |