Parameter Name |
Out-BSC Port No. |
|---|---|
Description |
This parameter specifies the number of the out-BSC port where the BSC interface board is located. That is, the number of the port on the interface board, which connects the BTS to the BSC.If the BTS supports the ring network, you can infer that This param |
GUI Value Range |
[0,83] |
Default Value |
255 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
This parameter is to be viewed only. |
Recommended Value |
None |
Parameter Relationship |
None |
BSC Feature |
Monitoring timeslot |
Parameter Class |
Parameters About Equipment |
Caution |
This parameter cannot be set to the number of the occupied E1 port. If all monitoring timeslots are configured on one interface board, the In-BSC Port No. and the Out-BSC Port No. must be set to different E1 ports on the interface board. |