Parameter Name |
Support EDGE |
|---|---|
Description |
This parameter specifies whether to enable the EDGE function in a cell. Compared with GSM, EDGE supports high-rate data transmission. The enhanced data rates for GSM evolution (EDGE) consists of EGPRS and ECSD. The EGPRS is the enhanced GPRS, which improves the data rate of each data channel. The EGPRS improves the capability of single-timeslot data transmission through the 8PSK modulation scheme on the Um interface and improves the data transmission capability of a single subscriber through multiple timeslots binding. ECSD is not implemented yet. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
EGPRS |
Parameter Class |
Parameters About Radio Resources |
Caution |
For the BTS that does not support EDGE or the cell where EDGE is not enabled, the parameter must be set to No. Otherwise, some MSs may not access the network. |