Parameter Name |
Inter-layer HO Threshold |
|---|---|
Description |
This parameter is used to determine the inter-layer in the 16 bits to sort the candidate cells for handovers. Inter-layer HO threshold of a serving cell = configured Inter-layer HO Threshold - Inter-layer HO Hysteresis Inter-layer HO Threshold of an adjacent cell = configured Inter-layer HO Threshold + Inter-layer HO Hysteresis of an adjacent cell - 64. In HO Algorithm II, the triggering condition for BQ HO is as follows: If an adjacent cell has a higher priority than a serving cell, the level in the adjacent cell should be restricted. Inter-layer HO Threshold of an adjacent cell = configured Inter-layer HO Threshold + Inter-layer HO Hysteresis of an adjacent cell - 64. |
GUI Value Range |
[0,63] |
Default Value |
25 |
Unit |
dB |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Note that in hierarchical handover and load handover, the priority of the target cell must be higher than the Inter-layer HO Threshold. If the DL receive level of a cell is lower than the Inter-layer HO Threshold, the cell is listed in the candidate cells based on receive level. The cell takes a low priority for handovers. |
Recommended Value |
25 |
Parameter Relationship |
Inter-layer HO Hysteresis |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |