Parameter Name |
Min DL level on Candidate Cell |
|---|---|
Description |
This parameter specifies the minimum downlink receive level of a neighbor cell. Expected downlink level of the neighbor cell >= (Minimum downlink power of the candidate cell for handover + Minimum access level offset) The M criterion is met if the Expected uplink level of the neighbor cell >= (Minimum uplink power of the candidate cell for handover + Minimum access level offset); otherwise, the M criterion is not met. |
GUI Value Range |
[0,63] |
Default Value |
10 |
Unit |
Levels |
Step |
- |
Modification Rules |
None |
Configuration Policy |
1. This parameter must be properly specified because it limits the number of candidate cells. If this parameter is set to a great value, some desired cells may be excluded from the candidate cells. If this parameter is set to a small value, an unwanted cell may become the target cell. This leads to handover failures or call drops. 2. A cell can become a candidate cell only when the receive level minus this parameter is greater than the minimum access level offset. |
Recommended Value |
10 |
Parameter Relationship |
Min Access Level Offset |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |