Parameter Name |
Common Access Control Class |
|---|---|
Description |
This parameter specifies whether to allow the MSs of common access classes to access the network. This parameter is used for load control. Value 1 indicates that access is not allowed. Value 0 indicates that access is allowed.For example, 0000000001 indicates that the MSs of all classes except class 0 are allowed to access the network. During the BTS installation, activation, or cell maintenance test, this parameter can be set to 1. All MSs are not allowed to access the network, thus reducing the impact on installation or maintenance. In the cell where the traffic volume is heavy, congestion may occur in busy hours. For example, more RACH burst occurs, the AGCH is overloaded, or the Abis interface is overloaded.If this parameter is set to 1 for the MSs of some classes, the traffic volume in this cell may be reduced. |
GUI Value Range |
[Level 9 Forbidden, Level 8 Forbidden, Level 7 Forbidden, Level 6 Forbidden, Level 5 Forbidden, Level 4 Forbidden, Level 3 Forbidden, Level 2 Forbidden, Level 1 Forbidden, Level 0 Forbidden] |
Default Value |
0000000000 |
Unit |
Levels |
Step |
- |
Modification Rules |
None |
Configuration Policy |
This parameter can be used to control network load based on the MS access classes, thus preventing some MSs from accessing the network. It is recommended that this parameter be not used. |
Recommended Value |
0000000000 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |