Parameter Name |
Special Access Control Class |
|---|---|
Description |
This parameter specifies whether to allow the MSs of special access classes to access the network. This parameter is used for load control. Value 1 indicates that access is not allowed. Value 0 indicates that access is allowed. For example, 000001 indicates that users of all classes except class 10 are allowed to access the network. In the cell where the traffic volume is heavy, congestion may occur in busy hours. For example, more RACH burst occurs, the AGCH flow is overloaded, or the Abis interface flow is overloaded.If this parameter is set to 1 for the MSs of some classes, the traffic volume in this cell may be reduced. |
GUI Value Range |
[Level 15 Forbidden, Level 14 Forbidden, Level 13 Forbidden, Level 12 Forbidden, Level 11 Forbidden] |
Default Value |
00000 |
Unit |
Levels |
Step |
- |
Modification Rules |
None |
Configuration Policy |
This parameter can be used to control network load based on the MS access classes, thus preventing some MSs from accessing the network. It is recommended that this parameter be not used. |
Recommended Value |
00000 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |