Parameter Name |
TCH/F Uplink DTX |
|---|---|
Description |
This parameter specifies whether to allow the MS to use the Discontinuous Transmission (DTX) function. For details, see GSM Rec. 05.08. |
GUI Value Range |
[May Use,Shall Use,Shall not Use] |
Default Value |
Shall Use |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The DTX function allows a transmitter to stop power transmission in the case of no voice transfer. This function has the following benefits: 1. On the uplink: decreasing the power consumption of the MS and reducing system interference 2. On the downlink: decreasing power consumption of the BTS, reducing system interference, and reducing intermodulation inside the BTS 3. From the network perspective, the inter-frequency interference is reduced and the network quality is improved. TCH/F Uplink DTX is not restricted by the MSC.It is allowed MS to use DTX when this parameter is set to " Shall Use". It is not allowed MS to use DTX when this parameter is set to " May Use" or " Shall not Use". |
Recommended Value |
Shall Use |
Parameter Relationship |
None |
BSC Feature |
Discontinuous Transmission and Discontinuous Reception |
Parameter Class |
Parameters About Radio Resources |
Caution |
The DTX function is implemented on the basis of the following basic functions: voice activity detection (VAD), silence descriptor (SID), and comfort noise. The Huawei BSC can control whether to enable the downlink DTX function. For details, see the description of the DL DTX parameter. |