Parameter Name |
Cell_Bar_Access |
|---|---|
Description |
This parameter specifies the cell bar access (CBA). Value No indicates that cell access is allowed. Value Yes indicates that cell access is not allowed. Together with CBQ, this parameter can be used to determine the priority of cells. For details, see GSM Rec. 04.08. Cell_Bar_Qualify Cell_Bar_ Access Cell selection priority Cell reselect priority No No Normal Normal No Yes Barred Barred Yes No Low Normal Yes Yes Low Normal |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The CBA function applies to special conditions. If this parameter is set to Yes and Cell Bar Quality (CBQ) is set to No, only handovers are allowed in a cell, and direct access of an MS is not allowed. This condition applies to a dual-network coverage cell. For a common cell, this parameter should be set to No. The value of CBA affects the network access of an MS. |
Recommended Value |
No |
Parameter Relationship |
Cell_Bar_Qualify |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |