Parameter Name |
CRH(dB) |
|---|---|
Description |
This parameter is used to determine whether cell reselection is performed between different LACs. This parameter can prevent frequent location update, thus lowering the possibility of losing paging messages. For details, see the description of the cell reselection hysteresis. |
GUI Value Range |
[0,2,4,6,8,10,12,14] |
Default Value |
6 |
Unit |
dB |
Step |
- |
Modification Rules |
None |
Configuration Policy |
An MS does not respond to pagings during location update. Thus, the connection rate drops if cell reselection is performed. If this parameter is set to a too small value, ping-pong location updates occur and the signaling load on the SDCCH increases. If this parameter is set to a too great value, the cell that the MS camps on for a long time may not be the best after the LA changes. |
Recommended Value |
Generally, this parameter is set to 6. For dualband networks in urban areas not sharing the LAC, this parameter is set to 8-10. |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |