Parameter Name |
MBR |
|---|---|
Description |
This parameter is used for the MS to report neighbor cell explanation of multiple bands. It is sent in the system information 2ter and 5ter. |
GUI Value Range |
[0,3] |
Default Value |
0 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
In a multiple band network, this parameter can be set on the basis of the traffic volume on each frequency band. If this parameter is set to 0, the MS reports the measurement results of six neighbor cells known and permitted by the NCC at the bands with the best signal regardless of the band at which the neighbor cell is located. If this parameter is set to 1, the MS reports the measurement result of a neighbor cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighbor cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports the measurement results of other neighboring cells regardless of the bands at which the neighboring cells are located. If this parameter is set to 2, the MS reports the measurement results of two neighbor cell known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighbor cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports the measurement results of other neighbor cells regardless of the bands at which the neighbor cells are located. If this parameter is set to 3, the MS reports the measurement results of three neighbor cells known and permitted by the NCC at each band with the best signal (the band serving the current cell not included). The MS reports the measurement result of the neighbor cell at the band serving the current cell in the redundant position. If the redundant position is still available, the MS reports the measurement results of other neighbor cells regardless of the bands at which the neighbor cells are located. When the traffic volumes of multiple bands are the same and there is no special requirement on the band, the MBR (Multi Band Report) is set to 0. When the traffic volumes of multiple bands are different and the MS is expected to enter a band preferentially, the MBR (Multi Band Report) is set to 3. In other cases except the first two cases, the MBR (Multi Band Report) is set to 1 or 2. For details, see GSM Rec. 05.08. |
Recommended Value |
0 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |