Parameter Name |
Qsearch I |
|---|---|
Description |
This parameter specifies the level threshold for cell reselection in idle mode. In idle mode, if the signal level in the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example: If this parameter is set to 5 and if the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells. If this parameter is set to 10 and if the signal level of the serving cell is higher than 10, the MS starts to search for 3G cells. 0: -98 dBm 1: -94 dBm 2: -90 dBm 3: -86 dBm 4: -82 dBm 5: -78 dBm 6: -74 dBm 7: (always), that is, the MS keeps searching for 3G cells 8: -78 dBm 9: -74 dBm 10: -70 dBm 11: -66 dBm 12: -62 dBm 13: -58 dBm 14: -54 dBm 15: ∞(never), that is, the MS does not search for 3G cells |
GUI Value Range |
[0,15] |
Default Value |
15 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
15 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |