Parameter Name |
Qsearch P |
|---|---|
Description |
This parameter specifies one threshold of the signal level for cell reselection in packet transfer mode. In packet transfer mode, if the signal level in the serving cell is below [0, 7] or above [8, 15], the MS starts to search for 3G cells. For example: If this parameter is set to 5 and if the signal level of the serving cell is lower than 5, the MS starts to search for 3G cells. If this parameter is set to 10 and if the signal level of the serving cell is higher than 10, the MS starts to search for 3G cells. 0: -98 dBm 1: -94 dBm ... 6: -74 dBm 7: (always) 8: -78 dBm 9: -74 dBm ... 14: -54 dBm 15: ∞ (never) |
GUI Value Range |
[0,15] |
Default Value |
15 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
15 |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |