Parameter Name |
Short Message Uplink Disabled |
|---|---|
Description |
This parameter specifies whether to disable the sending of point-to-point short messages. In specific cells, sending point-to-point short messages on the uplink is disabled to ensure sufficient radio channels for calls. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Pay special attention to the setting of this parameter during an upgrade. If sending short messages is allowed, this parameter must be set to No. If this parameter is set to Yes, radio channels cannot be used to send short messages regardless of whether an MS is busy or not. |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
Short Message Services |
Parameter Class |
Parameters About Radio Resources |
Caution |
Pay special attention to the setting of this parameter during an upgrade. If sending short messages is allowed, this parameter must be set to No. |