Parameter Name |
Allow eMLPP |
|---|---|
Description |
This parameter specifies whether to allow the enhanced multi-level precedence and preemption (eMLPP) function. In eMLPP, the network can use different policies such as queuing, preemption, and directed retry based on the priorities of different calls when network resources are occupied. If the Allow eMLPP is set to Yes, when preemption occurs, the MS with the lowest priority performs handover, and the MS with higher priority seizes the idle channel after handover. If the Allow eMLPP is set to No, a certain MS with lower priority releases the channel, the MS with higher priority seizes the idle channel after release. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The eMLPP supports a maximum of seven priorities (A, B, and 0-4). The two highest priorities are reserved only for local use in the network. Priorities 0-4 are used for subscribers all over the world. If the eMLPP function needs to be fully implemented, the support of the MSC, HLR, MS (including SIM) is required. |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |