Parameter Name |
Abis Resource Adjustment TCHH Function Switch |
|---|---|
Description |
This parameter specifies whether to enable the Abis resource adjustment TCHH function. This parameter determines whether the BSC preferentially allocates TCHHs to an MS when the Abis resources are insufficient. After this parameter is set to Yes, TCHHs are preferentially allocated under the following conditions: the channel usage in Fix Abis mode is higher than the value of Fix Abis Prior Choose Abis Load Threshold(%) and the channel usage in Flex Abis mode is higher than Flex Abis Prior Choose Abis Load Threshold(%). |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
After the Flex Abis is enabled, the Abis interface transmission resources may become insufficient even if there are available TCHFs. In this case, you should set this parameter to Yes to trigger the TCHH allocation according to the load of Abis interface transmission resources. In this way, the admission rate can be increased. |
Recommended Value |
No |
Parameter Relationship |
Flex Abis Prior Choose Abis Load Threshold(%), Fix Abis Prior Choose Abis Load Threshold(%) |
BSC Feature |
None |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |