Parameter Name |
Rx_Level_Drop HO Allowed |
|---|---|
Description |
This parameter specifies whether to enable the rapid level drop handover. When this function is enabled, an MS can be handed over to a new cell before the occurrence call drop caused by the rapid drop of the receive level of the MS. |
GUI Value Range |
[No,Yes] |
Default Value |
No |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
In dual-band networking mode for densely populated urban areas, the level drops rapidly due to multiple barriers. The propagation loss of the 1800 MHz frequency band is greater than the propagation loss of the 900 MHz frequency band. Considering the preceding factors, you can enable the Rx_Level_Drop HO Allowed for the DCS1800 cell. Under normal conditions, this parameter is set to No. To support the rapid level drop handover, the BSC must have the original MR. |
Recommended Value |
No |
Parameter Relationship |
None |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
This parameter is available only when HO Control Switch is set to HO Algorithm I. This parameter is invalid when the HO Control Switch is set to HO Algorithm II. |