Parameter Name |
PBGT HO Allowed |
|---|---|
Description |
This parameter specifies whether to enable the PBGT (POWER BUDGET) handover algorithm. Based on the path loss, the BSC uses the PBGT handover algorithm to search for a desired cell in real time and decides whether a handover should be performed. The cell must have less path loss and meet specific requirements. To avoid ping-pong handovers, the PBGT handover can be performed only on TCHs between the cells of the same layer and hierarchy. The PBGT handover cannot be performed on SDCCHs. |
GUI Value Range |
[No,Yes] |
Default Value |
Yes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Huawei recommends that the PBGT handover algorithm be enabled. Proper use of PBGT handovers helps to reduce cross coverage and to avoid co-channel interference and adjacent channel interference. |
Recommended Value |
Yes |
Parameter Relationship |
None |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
This parameter is available only when HO Control Switch is set to HO Algorithm I. This parameter is invalid when the HO Control Switch is set to HO Algorithm II. |