Parameter Name |
Edge Handover Allowed |
|---|---|
Description |
This parameter specifies whether to enable the edge handover algorithm. When an MS makes a call at the edge of a cell, the call may drop if the receive level is too low. To avoid such a call drop, an edge handover can be performed. When the UL receive level of the serving cell is lower than the Edge HO UL RX_LEV Threshold or the DL receive level of the serving cell is lower than the Edge HO DL RX_LEV Threshold, the MS is handed over to a neighbor cell. |
GUI Value Range |
[No,Yes] |
Default Value |
If HO Control Switch is set to HO Algorithm I, the default value of this parameter is Yes. If HO Control Switch is set to HO Algorithm II, the default value of this parameter is No. |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Huawei recommends that this parameter be set to Yes. In other words, the edge handover algorithm is enabled. |
Recommended Value |
Yes |
Parameter Relationship |
None |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
During the edge handover, the MS can only be handed over to the cell that ranks in front of the serving cell. |