Parameter Name |
BQ HO Allowed |
|---|---|
Description |
This parameter specifies whether the bad quality (BQ) handover is enabled. Whether a BQ handover should be enabled depends on the UL and DL transmission quality (BER). When the UL signal quality or the DL signal quality exceeds the BQ handover threshold. a BQ emergency handover is performed. A rise in BER may result from too low a signal level or channel interference. |
GUI Value Range |
[No,Yes] |
Default Value |
Yes |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
None |
Recommended Value |
Yes |
Parameter Relationship |
None |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
During the BQ handover, an MS is preferentially handed over to a target cell. If no target cell is available, the MS can also be handed over to a channel within the serving cell on condition that the intra-cell handover is enabled. |