Parameter Name |
Allowed M.R Number Lost |
|---|---|
Description |
This parameter specifies the allowed number of consecutive MRs that are lost during interpolation. If the number of consecutive MRs that are lost is equal to or smaller than the value of this parameter, the linear interpolation processing of the lost MRs is performed according to two consecutive MRs that are lost. If the number of consecutive MRs that are lost is greater than the value of this parameter, all lost MRs are discarded, and calculations are made again when new MRs are received. |
GUI Value Range |
[0,31] |
Default Value |
4 |
Unit |
None |
Step |
- |
Modification Rules |
None |
Configuration Policy |
Measurement reports fail to be decoded correctly when the signal strength in the serving cell is poor. When the number of consecutive MRs that are lost is greater than the value of this parameter, all previous measurement reports are discarded and the handover may fail. Therefore, Huawei recommends that this parameter be set to a great value for emergency handovers. |
Recommended Value |
4 |
Parameter Relationship |
None |
BSC Feature |
Handover and power control |
Parameter Class |
Parameters About Radio Resources |
Caution |
None |