Parameter Name |
Load HO Threshold(%) |
|---|---|
Description |
When Load HO Allowed is set to Yes, Load HO Threshold should be set to 85. The traffic load of a cell refers to the TCH seizure rate in the cell. The load handover is triggered when the traffic load in a cell is greater than the value of this parameter. In other words, the load handover is triggered when the ratio of TCHs occupied in a cell reaches the threshold defined for load handover. |
GUI Value Range |
[0,100] |
Default Value |
90 |
Unit |
% |
Step |
- |
Modification Rules |
None |
Configuration Policy |
The setting of this parameter affects the triggering of the load handover. If it is set to a lower value, the number of load handovers increases. |
Recommended Value |
90 |
Parameter Relationship |
Load HO Allowed |
BSC Feature |
Handover |
Parameter Class |
Parameters About Radio Resources |
Caution |
The Load HO Threshold and Load Req.on Candidate Cell parameters affect the sorting of candidate cells. Therefore, when the cell load is high, if this parameter is improperly set, the PBGT handover may fail. |